Skip to content
Tools Kitby QANEN
3D Tools

3D Printing Time Calculator

Estimate print time from extrusion rate or layer count — plus overnight fit and electricity used.

mm

Drives layer count — decisive for resin.

×

Multiples the total (resin barely grows per extra piece).

g

Density converts grams to volume.

Sets print speed and layer height together.

mm
mm
mm/s
Travel & overhead factor

Infill above the shell is already modelled; this covers travel moves, retractions and heating between extrusions. 1.2–1.4 suits most prints.

×
Estimated print time400 layers

3 h 37 min

Total wall-clock
3 h 37 min
Volumetric flowline width × layer × speed
4.8 mm³/s

Fits within an overnight run (3.6 h).

Electricity burned≈ $0.07 at 120 W average
0.43 kWh
An planning estimate, not a slicer replacement — real times swing with geometry, supports and your machine’s acceleration. When you have the file, the slicer is authoritative.

More tools to try

Live

3D Printing Cost Calculator

The true cost of one print — filament, electricity, depreciation, failures and your time, itemised.

Open tool
Live

3D Model Scaling Calculator

Resize by %, to an exact size, between miniature scales, or for shrinkage — and see the s³ material hit.

Open tool
Live

3D Print Material Calculator

Estimate the filament grams or resin ml a model really uses — shells, skin, infill and supports included.

Open tool